Q: I am a beginner, and I do not know what things should I consider when buying a board, bindings and boots? I think any help is welcome!
A: Of course, would be the simplest, quickest and best way to get your equipment, will be visiting your local store, where the REP, you will connect with the equipment that fits a.) and b.) according to your riding level. Fit is the most important thing when you shop with pickled if they do not fit as there is nothing you will do thatmake it work.
As a beginner, you should for a true-twin (see nose / tail the same length, shape and flex, clamping screw slots on board are centered, alias) not a setback.
Most manufacturers rate their board, on a flex rating. For beginners on a scale of 1-10, you want a board to the 3s.
There are two measures of board flex: along the length of the Executive Board for pressing / ollies, and across the width of the playing field for the control and the initiationis (from the heel to the toes, if your board strapped in sitting down and pushed the ball of your foot down on your way as a gas pedal, your board will twist. This is flex) to your board. A beginner board needs to flex just as soft as it is in the length, as beginners give up something more if they have mastered their balance and can rely turning technique. This will minimize the edge catches and to maximize the control of the Board.
Entry-Level --Plates have a longer effective edge / flat waist is too long, is controlled to produce. Think Longboard versus short board skateboarding or surfing: A larger, wider board surfing and skating like a board with more edge and effective in shallow sidecut snowboard.
With respect to the board level, no higher than your chin. Even if you're young and growing, if a board is too large for your weight and height, you will have received a lot Difficult to control.
Now the big question, you should buy reverse fall or not?
I think, conversely, has helped to overthrow a place beginning riders who are not in a position to engage, to / complete turns or edges to catch often, but when you're past that do not usually do not bulge out. I think if the driver is informed of any fundamental error in the connection, they need to instituting the domed progress, shaping and changing the turning edges with the working properties of traditional> Board. This is very technical, I know, but believe me, if you have a vaulted snowboard you will not regret it, as you will progress in the park and on steep slopes. Grab a fall-reverse deck, if you nailed Advanced Parking order or for off-piste excursion.
A common misconception is that if you have an entry-level board as a beginner, you need a new board at the end sooner rather than later, start pressing the steep and difficult parts of the mountain, and getThis is simply not the case. The majority of any board right size, that the driver is all over the place that you want to go there limits, but a specifically developed for beginners learning experience for your more fun.
For binder, get something softer flex, so you do not dig an edge, every time you shift your weight, it obviously, you want to adjust the bond (S, M, L) on your boat.
For the boots again, it would be wise to go with a boat on a soft flexfirst. Or if you plan to travel more than 30 days, you can for housing during the break has flex boot in by buying a stiffer. BOOT FIT is something so important that I did bold and underlined, like this. Forget your personal taste and preference for a second company, you need a boat that is right for your foot and ankle shape. * Your boat must fit snuggly, ie should touch your big toes.
Subtract at least one size from your shoe size for break-in set. Even though youare young and growing to accept the fact that you are my new shoes every year, because if your boat does not fit, you can stifle progression or even quitting altogether frustrated in the end, it makes things unpleasant.
Booting The only surefire tip to buy? Go to a store and try on as many boot companies and models, as you can, it will definitely be that way standouts felt more comfortable than others ... Attract and legit snowboard socks.
I'm not much for specific modelRecommendations, but here are some companies with solid snowboards, boots and bindings are:
Humanity
Ride
O-Matic
K2
Burton
Salomon
Nitro
Never Summer
Rome
Capita
Nidecker
Head
Vans
DC
Thirtytwo
Stepchild
LibTech
GNU
Forum
Union
and much more, but that's a start. Most companies are openly saying that a board is beginner friendly, but if you do not normally find boards with the constructionI described below $ 400. When in doubt, email the company and ask, they are always stoked to help a potential customer.
